Electrical Drafts Man Jobs in Yemen

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Overview of position Our client is undertaking a project that aims to restore access to critical urban service in selected cities within the Republic of Yemen under Yemen Integrated Urban Services Emergency Project Phase two (YIUSEP-II) . One of these services is Energy services. Our client will be responsible for the design and implementation works of PV solar systems and diesel gensets that will increase the targeted facilities reliability and service capacity. All of that to be done ensuring highest standards in design, and respect of state of the art requirements for aesthetics, safety and sustainability. To hire professional Consultant Engineer able to provide a variety of engineering services required by the Our client under instructions and directions of the Project Manager, Renewable Energy Specialist and City Engineer. The engineering services desired include, but are not limited to:</p><p>Role objectives The scope is to prepare technical designs, Bill of Quantities (BOQ), and tender documents of solar system and/or genset system solutions to target facilities in accordance with UNOPS guidelines and standards. This will include but not limited to:</p><ul><li>Carry out field visits to target facilities - which may include traveling to various governates- to:</li><ul><li>a. Inspect and verify the actual needs;</li><li>b. Consult with the facility s management and administration about the expected needs.</li><li>c. Cooperate with electrical engineer to identify the required space for system required components such as Solar PV panels, distribution and control boards, batteries, Diesel generators and fuel tanks.</li><li>d. Cooperate with the electrical engineer to Identify possible cable routs and any possible obstacles.</li><li>e. Instruments. The engineer shall be familiar with measurement instruments and apparatus required for such assignment including Surveying Equipment such as TOTAL STATIONS.</li></ul><li>Prepare appropriate civil and steek structural designs for target facilities based on proposed energy system either solar or gensets - and according to site suitability. This will include the following:</li><ul><li>a. A full description of the target facility including its location (with GIS coordinates), existing capacity, functionality, provide photograph for the available areas for the required civil and steel structure either rooftop or on ground.</li><li>b. AutoCAD drawings for the available areas presenting the south direction and azimuth, illustrating the proposed location and details for the panels, steel structure(s), Battey or Generator rooms.</li><li>c. The design shall consider HSSE and aesthetic concerns.</li></ul><li>Provide technical and administrative support throughout all stages of designing processes and respond for any inquiries and modification requests from design review team through UNOPS energy specialist until getting final approval and design certificate.</li><li>Working in coordination with UNOPS Renewable Energy Coordinator, City Engineers and Social Safeguard Officer.</li><li>The consultant will prepare and deliver the required documents in a professional way within specified working period which will include but not limited to:</li><ul><li>- Technical assessment report.</li><li>- High quality digital photographs.</li><li>- AutoCAD detailed design using approved layout templates.</li><li>- Sizing Calculation sheets.</li><li>- Bill of Quantities (BOQ), including detailed specifications and cost estimation.</li></ul><li>All team s members shall working side by side and perform all tasks assigned cooperatively.</li><li>Protecting the confidentiality of work.</li><li>Any additional duties required as needed within the scope of the project.</li></ul><p>Project Supervising: The minimum criteria in regard to the duties responsibilities and expectations of the supervising during the implementation phase of the hybrid solar system project in accordance with UNOPS guidelines and standards. This will include but not limited to:</p><ul><li>Responsible for all QC activity on site, performing QC Assessments of work by Technicians.</li><li>Conduct on- site observations to assure conformance with the contract documents regarding work, materials and equipment.</li><li>Arrange and attend field observations where issues of conformity with approved design and specifications arise.</li><li>Make sure that the contractor is adhering the minimum safety and quality policies and procedures.</li><li>Review shop drawings and advise of any significant changes required.</li><li>Issue field instructions for correction of any work that does not conform to the approved contract documents, and if needed, Request change orders when required for review, discussion and approval.</li><li>Review the project file maintained on the site by the Supplier/contractor to ensure that the necessary tests have been performed and the results were satisfactory, issue remedial instructions if the test results were found unsatisfactory.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Key competencies 4. Qualifications and Experience a. Education University degree in Civil engineering. b. Work Experience More than 6 years working experience in project assessment, design supervising and management experience in civil and steel structural design and implementation is essential. Experience in the usage of computers and software packages (Structural design software, Autodesk AutoCAD, Microsoft office). Very Good Knowledge in written and oral of English and Arabic languages is required. c. Key Competencies Excellent oral and written communication skills. Strong interpersonal skills and ability to work as part of a team Team management This role has no team management responsibility. Further information Qualified female candidates are encouraged to apply for this role.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><span><strong>Organizational Setting</strong></span></p><br><p><span>FAO's office for Yemen is responsible for developing, promoting, overseeing and implementing agreed strategies for addressing countrywide food, agriculture and rural development priorities under Yemen. It develops and maintains relations with the relevant Ministries at country level. </span><br><span>This position is based in FAO Representation in Aden, Yemen. The main aim of the FAO country offices, which are headed by an FAO Representative, is to assist governments to develop policies, programmes and projects to achieve food security and to reduce hunger and malnutrition, to help develop the agricultural, fisheries and forestry sectors and to use their environmental and natural resources in a sustainable manner.</span></p><br><p><br><span><strong>Reporting Lines</strong></span></p><br><p><span>Under the overall guidance of the FAO Representative (FAOR), and the technical guidance and the direct supervision of the Construction Engineer Specialist.</span></p><br><p><br><span><strong>Technical Focus</strong></span></p><br><p><span>The National Engineer Analyst – Electricity will be responsible for the planning, design, technical review of all electrical, solar power, HVAC, low-current, mechanical, and safety systems for FAO projects across various programmes, as well as FAO offices and guesthouses. The incumbent ensures that all systems are designed and implemented in accordance with international standards, FAO technical guidelines, and safety requirements,</span></p><br><p><br><span><strong>Tasks and responsibilities</strong></span></p><br><p><span>• Support the analysis and review of electrical, solar power, HVAC, and electromechanical systems, including load calculations, wiring layouts, and emergency/backup power configurations, under the guidance of the Construction Engineer Specialist.</span><br><span>• Assist in preparation and validation of low-current system designs, such as CCTV, fire alarm/suppression, public address, and access-control systems.</span><br><span>• Support in preparation of BoQs, cost estimates, and technical specifications for all electrical, HVAC, solar, and low-current components of FAO projects.</span><br><span>• Support site inspections and monitor the implementation to ensure compliance with approved drawings, specifications, and safety standards.</span><br><span>• Assist in reviewing the delivered materials for quality and conformity with technical specifications.</span><br><span>• Support in review contractors’ payment certificates, verify executed quantities, and provide technical certification.</span><br><span>• Contribute to technical assessments of electrical, solar, HVAC, and low-current systems in FAO offices and guesthouses and recommend upgrades or corrective actions, under the guidance of the Construction Engineer Specialist.</span><br><span>• Work closely with Construction Engineer Specialist to provide technical support to construction engineers, procurement teams, and contractors.</span></p><br><p><span><strong>CANDIDATES WILL BE ASSESSED AGAINST THE FOLLOWING</strong></span></p><br><p><br><span><strong>Minimum Requirements </strong></span></p><br><p><span>• Bachelor’s degree in electrical engineering, Electromechanical Engineering, Mechanical Engineering, or related field.</span><br><span>• Minimum of five years of relevant professional experience in electrical and electromechanical engineering.</span><br><span>• Working knowledge of English and Arabic.</span><br><span>• National of Yemen.</span></p><br><p><br><span><strong>FAO Core Competencies</strong></span></p><br><p><span>• Results Focus</span><br><span>• Teamwork</span><br><span>• Communication</span><br><span>• Building Effective Relationships</span><br><span>• Knowledge Sharing and Continuous Improvement</span></p><br><p><span><strong>ADDITIONAL INFORMATION</strong></span></p><br><br><ul><li><span>FAO does not charge a fee at any stage of the recruitment process (application, interview meeting, processing)</span></li><li><span>Applications received after the closing date will not be accepted</span></li><li><span>Please note that FAO only considers higher educational qualifications obtained from an institution accredited/recognized in the World Higher Education Database (WHED), a list updated by the International Association of Universities (IAU) / United Nations Educational, Scientific and Cultural Organization (UNESCO). The list can be accessed at </span><span>http://www.whed.net/ </span></li><li><span>For additional employment opportunities visit the FAO employment website: http://www.fao.org/employment/home/en/ </span></li><li><span> Appointment will be subject to certification that the candidate is medically fit for appointment, accreditation, any residency or visa requirements, and security clearances. </span></li></ul> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph">*<div> <p> </p> <p> <strong>Organizational Setting</strong> </p> <p>FAO's office for Yemen is responsible for developing, promoting, overseeing and implementing agreed strategies for addressing countrywide food, agriculture and rural development priorities under Yemen. It develops and maintains relations with the relevant Ministries at country level. <br>This position is based in FAO Representation in Aden, Yemen. The main aim of the FAO country offices, which are headed by an FAO Representative, is to assist governments to develop policies, programmes and projects to achieve food security and to reduce hunger and malnutrition, to help develop the agricultural, fisheries and forestry sectors and to use their environmental and natural resources in a sustainable manner.</p> <p> <br> <strong>Reporting Lines</strong> </p> <p>Under the overall guidance of the FAO Representative (FAOR), and the technical guidance and the direct supervision of the Construction Engineer Specialist.</p> <p> <br> <strong>Technical Focus</strong> </p> <p>The National Engineer Analyst Electricity will be responsible for the planning, design, technical review of all electrical, solar power, HVAC, low-current, mechanical, and safety systems for FAO projects across various programmes, as well as FAO offices and guesthouses. The incumbent ensures that all systems are designed and implemented in accordance with international standards, FAO technical guidelines, and safety requirements,</p> <p> <br> <strong>Tasks and responsibilities</strong> </p> <p> Support the analysis and review of electrical, solar power, HVAC, and electromechanical systems, including load calculations, wiring layouts, and emergency/backup power configurations, under the guidance of the Construction Engineer Specialist.<br> Assist in preparation and validation of low-current system designs, such as CCTV, fire alarm/suppression, public address, and access-control systems.<br> Support in preparation of BoQs, cost estimates, and technical specifications for all electrical, HVAC, solar, and low-current components of FAO projects.<br> Support site inspections and monitor the implementation to ensure compliance with approved drawings, specifications, and safety standards.<br> Assist in reviewing the delivered materials for quality and conformity with technical specifications.<br> Support in review contractors payment certificates, verify executed quantities, and provide technical certification.<br> Contribute to technical assessments of electrical, solar, HVAC, and low-current systems in FAO offices and guesthouses and recommend upgrades or corrective actions, under the guidance of the Construction Engineer Specialist.<br> Work closely with Construction Engineer Specialist to provide technical support to construction engineers, procurement teams, and contractors.</p> <p> </p> <p> <strong>CANDIDATES WILL BE ASSESSED AGAINST THE FOLLOWING</strong> </p> <p> <br> <strong>Minimum Requirements </strong> </p> <p> Bachelor s degree in electrical engineering, Electromechanical Engineering, Mechanical Engineering, or related field.<br> Minimum of five years of relevant professional experience in electrical and electromechanical engineering.<br> Working knowledge of English and Arabic.<br> National of Yemen.</p> <p> <br> <strong>FAO Core Competencies</strong> </p> <p> Results Focus<br> Teamwork<br> Communication<br> Building Effective Relationships<br> Knowledge Sharing and Continuous Improvement</p> <p> </p> <p> <br> </p> <p> </p> <p> <strong>ADDITIONAL INFORMATION</strong> </p> </div> <ul> <li>FAO does not charge a fee at any stage of the recruitment process (application, interview meeting, processing)</li> <li>Applications received after the closing date will not be accepted</li> <li>Please note that FAO only considers higher educational qualifications obtained from an institution accredited/recognized in the World Higher Education Database (WHED), a list updated by the International Association of Universities (IAU) / United Nations Educational, Scientific and Cultural Organization (UNESCO). The list can be accessed at http://www.whed.net/ </li> <li>For additional employment opportunities visit the FAO employment website: http://www.fao.org/employment/home/en/ </li> <li> Appointment will be subject to certification that the candidate is medically fit for appointment, accreditation, any residency or visa requirements, and security clearances. </li> </ul></div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><span><strong>Organizational Setting</strong></span></p><br><p><span>FAO's office for Yemen is responsible for developing, promoting, overseeing and implementing agreed strategies for addressing countrywide food, agriculture and rural development priorities under Yemen. It develops and maintains relations with the relevant Ministries at country level. </span><br><span>This position is based in FAO Representation in Aden, Yemen. The main aim of the FAO country offices, which are headed by an FAO Representative, is to assist governments to develop policies, programmes and projects to achieve food security and to reduce hunger and malnutrition, to help develop the agricultural, fisheries and forestry sectors and to use their environmental and natural resources in a sustainable manner.</span></p><br><p><br><span><strong>Reporting Lines</strong></span></p><br><p><span>Under the overall guidance of the FAO Representative (FAOR), and the technical guidance and the direct supervision of the Construction Engineer Specialist.</span></p><br><p><br><span><strong>Technical Focus</strong></span></p><br><p><span>The National Engineer Analyst - Civil will be responsible for the design, technical review, and supervision of all assigned civil and structural works, including building construction, rehabilitation, site development, and associated infrastructure for FAO projects across various programmes. The incumbent ensures that all structural designs, materials, and construction activities comply with international engineering standards, FAO technical specifications, and safety regulations.</span></p><br><p><br><span><strong>Tasks and responsibilities</strong></span></p><br><p><span>• Support field assessments of target sites to evaluate structural, architectural, and MEP (Mechanical, Electrical, Plumbing) conditions, identifying defects and determining rehabilitation needs.</span><br><span>• Prepare draft of detailed technical designs, drawings, specifications, and scope of work documents in compliance with all applicable standards and safety codes.</span><br><span>• Support the preparation of accurate bills of quantities (BOQs), cost estimates, and implementation timelines for required civil, architectural, and MEP works.</span><br><span>• Contribute technical inputs and analyzed cost information to project proposals, budgets, and implementation plans, ensuring consistency and accuracy of supporting documentation under supervision of the Lead Construction Engineer.</span><br><span>• Assist in maintaining rigorous project documentation and ensure all technical files meet standardized requirements.</span><br><span>• Support the monitoring of site activities and compile field information to progress tracking and reporting.</span><br><span>• Prepare daily, weekly, and monthly progress reports, and work closely with the Construction Engineer Specialist to support the preparation of inputs to the final project handover report.</span><br><span>• Work closely with the Construction Engineer Specialist to support the finalization and timely submission of all technical reports to supervising officers.</span></p><br><p><br><span><strong>CANDIDATES WILL BE ASSESSED AGAINST THE FOLLOWING</strong></span></p><br><p><br><span><strong>Minimum Requirements</strong></span></p><br><p><span>• Bachelor’s degree in civil engineering, Construction Engineering, Architectural Engineering, or related field.</span><br><span>• Minimum of five years of relevant professional experience in civil and structural engineering, including experience related to building construction, rehabilitation works, site development, or infrastructure projects.</span><br><span>• Working knowledge of English and Arabic.</span><br><span>• National of Yemen.</span></p><br><p><br><span><strong>FAO Core Competencies</strong></span></p><br><p><span>• Results Focus</span><br><span>• Teamwork</span><br><span>• Communication</span><br><span>• Building Effective Relationships</span><br><span>• Knowledge Sharing and Continuous Improvement</span></p><br><p><span><strong>ADDITIONAL INFORMATION</strong></span></p><br><br><ul><li><span>FAO does not charge a fee at any stage of the recruitment process (application, interview meeting, processing)</span></li><li><span>Applications received after the closing date will not be accepted</span></li><li><span>Please note that FAO only considers higher educational qualifications obtained from an institution accredited/recognized in the World Higher Education Database (WHED), a list updated by the International Association of Universities (IAU) / United Nations Educational, Scientific and Cultural Organization (UNESCO). The list can be accessed at </span><span>http://www.whed.net/ </span></li><li><span>For additional employment opportunities visit the FAO employment website: http://www.fao.org/employment/home/en/ </span></li><li><span> Appointment will be subject to certification that the candidate is medically fit for appointment, accreditation, any residency or visa requirements, and security clearances. </span></li></ul> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Buyer 2 is in charge of implementing the procurement strategy in a specific country or at regional level, in accordance with ICRC rules and regulations.</p><p><strong>Accountabilities &amp; functional responsibilities</strong></p><ul><li>Sources, assesses and evaluates suppliers in collaboration with their direct supervisor and updates supplier master data.</li><li>Follows up on the supply process from quotes/tenders and supplier selection to delivery, including negotiating with suppliers and establishing contracts.</li><li>Updates supplier performance indicators.</li><li>Takes part in collaborative planning with other ICRC staff.</li><li>Analyses the procurement portfolio and initiates long-term agreements for recurring purchases; suggests manufacturers from the region for the ICRC's worldwide annual tenders.</li><li>Supports the Supply-Chain Planners in deciding stock levels based on suppliers' delivery lead times.</li><li>Implements the ICRC's purchasing strategy for each product family in coordination with the Lead Buyer.</li><li>Maintains the material resource planning (MRP) parameters for item settings in JD Edwards software for their site or product family.</li><li>Monitors MRP suggestions and processes them for procurement; participates in establishing and reviewing buffer stock.</li><li>Supervises and trains Buyer 1.</li><li>Develops and maintains a network of procurement-related contacts.</li><li>Ensures that risks are mitigated by performing the controls assigned to his/her role as described in the Logistics Risk and Control Matrix</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Additional information</strong></p><ul><li>Type of role:Regular</li><li>Working rate:100%</li><li>Location:Sana'a</li><li>Job level:B3</li><li>Length of assignment: one year</li><li>Application deadline: 21/07/2026</li><li>Only Yemeni Nationals can apply</li></ul><p><strong>Our values</strong></p><ul><li>At the ICRC, we value impact, collaboration, respect, and compassion. We seek candidates who demonstrate behaviors based on these shared values. For more information on the ICRC values, please visit this page.</li></ul><p><strong>Reports to (role)</strong></p><ul><li>Logistics Support Centre/Country Procurement Manager, Logistics Country Manager</li></ul><p><strong>People management responsibilities</strong></p><ul><li>No</li></ul><p><strong>Scope &amp; impact</strong></p><ul><li>Is responsible for a purchase portfolio of up to Sfr 5 million, depending on the size of operations.</li><li>Geographical remit: regional.</li></ul><p><strong>Relationships</strong></p><ul><li>Internally, interacts with colleagues locally and worldwide.</li><li>Externally, interacts with procurement managers and a network of professional contacts within suppliers, NGOs, trade-support institutions, etc.</li></ul><p><strong>Certifications / Education required</strong></p><ul><li>Masters degree in procurement or supply management.</li><li>Degree in agronomy, computer science or civil, electrical, mechanical or electromechanical engineering an asset.</li><li>Computer proficiency.</li><li>Good command of English; depending on the country of assignment, good command of French may also be required.</li></ul><p><strong>Professional experience required</strong></p><ul><li>6 years' experience in international procurement.</li><li>Knowledge of quality management an asset.</li><li>Professional knowledge of a specific category of products.</li><li>Proficiency in supply software.</li><li>Professional knowledge of enterprise resource planning software an asset.</li></ul><p><strong>Language</strong></p><ul><li>Arabic</li><li>English</li><li>French</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Our client is undertaking a project that aims to restore access to critical urban service in selected cities within the Republic of Yemen under Yemen Integrated Urban Services Emergency Project Phase two (YIUSEP-II) . One of these services is Energy services. Our client will be responsible for the design and implementation works of PV solar systems and diesel gensets that will increase the targeted facilities reliability and service capacity. All of that to be done ensuring highest standards in design, and respect of state of the art requirements for aesthetics, safety and sustainability. To hire professional Consultant Engineer able to provide a variety of engineering services required by the Our client under instructions and directions of the Project Manager, Renewable Energy Specialist and City Engineer. The engineering services desired include, but are not limited to: Role objectives The scope is to prepare technical designs, Bill of Quantities (BOQ), and tender documents of solar system and/or genset system solutions to target facilities in accordance with Our client guidelines and standards. This will include but not limited to: Carry out field visits to target facilities - which may include traveling to various governates- to: a. Inspect and verify the actual needs; b. Consult with the facility s management and administration about the expected needs. c. Cooperate with electrical engineer to identify the required space for system required components such as Solar PV panels, distribution and control boards, batteries, Diesel generators and fuel tanks. d. Cooperate with the electrical engineer to Identify possible cable routs and any possible obstacles. e. Instruments. The engineer shall be familiar with measurement instruments and apparatus required for such assignment including Surveying Equipment such as TOTAL STATIONS. Prepare appropriate civil and steek structural designs for target facilities based on proposed energy system either solar or gensets - and according to site suitability. This will include the following: a. A full description of the target facility including its location (with GIS coordinates), existing capacity, functionality, provide photograph for the available areas for the required civil and steel structure either rooftop or on ground. b. AutoCAD drawings for the available areas presenting the south direction and azimuth, illustrating the proposed location and details for the panels, steel structure(s), Battey or Generator rooms. c. The design shall consider HSSE and aesthetic concerns. Provide technical and administrative support throughout all stages of designing processes and respond for any inquiries and modification requests from design review team through Our client energy specialist until getting final approval and design certificate. Working in coordination with Our client Renewable Energy Coordinator, City Engineers and Social Safeguard Officer. The consultant will prepare and deliver the required documents in a professional way within specified working period which will include but not limited to: - Technical assessment report. - High quality digital photographs. - AutoCAD detailed design using approved layout templates. - Sizing Calculation sheets. - Bill of Quantities (BOQ), including detailed specifications and cost estimation. All team s members shall working side by side and perform all tasks assigned cooperatively. Protecting the confidentiality of work. Any additional duties required as needed within the scope of the project. Project Supervising: The minimum criteria in regard to the duties responsibilities and expectations of the supervising during the implementation phase of the hybrid solar system project in accordance with Our client guidelines and standards. This will include but not limited to: Responsible for all QC activity on site, performing QC Assessments of work by Technicians. Conduct on- site observations to assure conformance with the contract documents regarding work, materials and equipment. Arrange and attend field observations where issues of conformity with approved design and specifications arise. Make sure that the contractor is adhering the minimum safety and quality policies and procedures. Review shop drawings and advise of any significant changes required. Issue field instructions for correction of any work that does not conform to the approved contract documents, and if needed, Request change orders when required for review, discussion and approval. Review the project file maintained on the site by the Supplier/contractor to ensure that the necessary tests have been performed and the results were satisfactory, issue remedial instructions if the test results were found unsatisfactory. Review the project file maintained at the site by the Supplier/contractor to ensure that all the necessary documents, such as, but not limited to, warranties, guarantees, test results, shop drawings, field instructions, reports and change orders, etc. Are filed and kept at a place. Review the implementation progress against the most current implementation progress schedule with the Supplier/contractor, evaluate its suggestions and submit recommendations. Review the payment requisitions presented by the Supplier/contractor and certify consistency with the implementation progress. Conduct an inspection of the development, or a portion of it, on request from the Supplier/contractor for issuance of a substantial completion certificate and develop a punch-list of incomplete items. Conduct an inspection of the development for the completion of the punch-list items. Inspect the material storage for their conformance with the contract requirements and general suitability, issue written recommendations, if necessary. All team s members shall working side by side and perform all tasks assigned cooperatively. Protecting the confidentiality of work. Any additional duties required as needed within the scope of the project. Project reporting To Project Manager</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>a. Education University degree in Civil engineering.</p><p>b. Work Experience More than 6 years working experience in project assessment, design supervising and management experience in civil and steel structural design and implementation is essential. Experience in the usage of computers and software packages (Structural design software, Autodesk AutoCAD, Microsoft office). Very Good Knowledge in written and oral of English and Arabic languages is required.</p><p>c. Key Competencies Excellent oral and written communication skills. Strong interpersonal skills and ability to work as part of a team Team management This role has no team management responsibility.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Overview of position Our client is undertaking a project that aims to restore access to critical urban service in selected cities within the Republic of Yemen under Yemen Integrated Urban Services Emergency Project Phase two (YIUSEP-II) . One of these services is Energy services. Our client will be responsible for the design and implementation works of PV solar systems and diesel gensets that will increase the targeted facilities reliability and service capacity. All of that to be done ensuring highest standards in design, and respect of state of the art requirements for aesthetics, safety and sustainability. To hire professional Consultant Engineer able to provide a variety of engineering services required by the Our client under instructions and directions of the Project Manager, Renewable Energy Specialist and City Engineer. The engineering services desired include, but are not limited to:</p><p>Role objectives The scope is to prepare technical designs, Bill of Quantities (BOQ), and tender documents of solar system and/or genset system solutions to target facilities in accordance with UNOPS guidelines and standards. This will include but not limited to:</p><ul><li>Carry out field visits to target facilities - which may include traveling to various governates- to:</li><ul><li>a. Inspect and verify the actual needs;</li><li>b. Consult with the facility s management and administration about the expected needs.</li><li>c. Cooperate with electrical engineer to identify the required space for system required components such as Solar PV panels, distribution and control boards, batteries, Diesel generators and fuel tanks.</li><li>d. Cooperate with the electrical engineer to Identify possible cable routs and any possible obstacles.</li><li>e. Instruments. The engineer shall be familiar with measurement instruments and apparatus required for such assignment including Surveying Equipment such as TOTAL STATIONS.</li></ul><li>Prepare appropriate civil and steek structural designs for target facilities based on proposed energy system either solar or gensets - and according to site suitability. This will include the following:</li><ul><li>a. A full description of the target facility including its location (with GIS coordinates), existing capacity, functionality, provide photograph for the available areas for the required civil and steel structure either rooftop or on ground.</li><li>b. AutoCAD drawings for the available areas presenting the south direction and azimuth, illustrating the proposed location and details for the panels, steel structure(s), Battey or Generator rooms.</li><li>c. The design shall consider HSSE and aesthetic concerns.</li></ul><li>Provide technical and administrative support throughout all stages of designing processes and respond for any inquiries and modification requests from design review team through UNOPS energy specialist until getting final approval and design certificate.</li><li>Working in coordination with UNOPS Renewable Energy Coordinator, City Engineers and Social Safeguard Officer.</li><li>The consultant will prepare and deliver the required documents in a professional way within specified working period which will include but not limited to:</li><ul><li>- Technical assessment report.</li><li>- High quality digital photographs.</li><li>- AutoCAD detailed design using approved layout templates.</li><li>- Sizing Calculation sheets.</li><li>- Bill of Quantities (BOQ), including detailed specifications and cost estimation.</li></ul></ul><p>All team s members shall working side by side and perform all tasks assigned cooperatively. Protecting the confidentiality of work. Any additional duties required as needed within the scope of the project.</p><p>Project Supervising: The minimum criteria in regard to the duties responsibilities and expectations of the supervising during the implementation phase of the hybrid solar system project in accordance with UNOPS guidelines and standards. This will include but not limited to:</p><ul><li>Responsible for all QC activity on site, performing QC Assessments of work by Technicians.</li><li>Conduct on- site observations to assure conformance with the contract documents regarding work, materials and equipment.</li><li>Arrange and attend field observations where issues of conformity with approved design and specifications arise.</li><li>Make sure that the contractor is adhering the minimum safety and quality policies and procedures.</li><li>Review shop drawings and advise of any significant changes required.</li><li>Issue field instructions for correction of any work that does not conform to the approved contract documents, and if needed, Request change orders when required for review, discussion and approval.</li><li>Review the project file maintained on the site by the Supplier/contractor to ensure that the necessary tests have been performed and the results were satisfactory, issue remedial instructions if the test results were found unsatisfactory.</li><li>Review the project file maintained at the site by the Supplier/contractor to ensure that all the necessary documents, such as, but not limited to, warranties, guarantees, test results, shop drawings, field instructions, reports and change orders, etc. Are filed and kept at a place.</li><li>Review the implementation progress against the most current implementation progress schedule with the Supplier/contractor, evaluate its suggestions and submit recommendations.</li><li>Review the payment requisitions presented by the Supplier/contractor and certify consistency with the implementation progress.</li><li>Conduct an inspection of the development, or a portion of it, on request from the Supplier/contractor for issuance of a substantial completion certificate and develop a punch-list of incomplete items.</li><li>Conduct an inspection of the development for the completion of the punch-list items.</li><li>Inspect the material storage for their conformance with the contract requirements and general suitability, issue written recommendations, if necessary.</li></ul><p>All team s members shall working side by side and perform all tasks assigned cooperatively. Protecting the confidentiality of work. Any additional duties required as needed within the scope of the project.</p><p>Project reporting To Project Manager</p><p>Key competencies</p><p>4. Qualifications and Experience</p><ul><li>a. Education University degree in Civil engineering.</li><li>b. Work Experience More than 6 years working experience in project assessment, design supervising and management experience in civil and steel structural design and implementation is essential. Experience in the usage of computers and software packages (Structural design software, Autodesk AutoCAD, Microsoft office). .</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>a. Education University degree in Civil engineering.</li><li>b. Work Experience More than 6 years working experience in project assessment, design supervising and management experience in civil and steel structural design and implementation is essential. Experience in the usage of computers and software packages (Structural design software, Autodesk AutoCAD, Microsoft office). Very Good Knowledge in written and oral of English and Arabic languages is required.</li><li>c. Key Competencies Excellent oral and written communication skills. Strong interpersonal skills and ability to work as part of a team</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><br><span><strong>Organizational Setting</strong></span></p><br><p><span>FAO's office for Yemen is responsible for developing, promoting, overseeing and implementing agreed strategies for addressing countrywide food, agriculture and rural development priorities under Yemen. It develops and maintains relations with the relevant Ministries at country level. </span><br><span>This position is based in FAO Representation in Aden, Yemen. The main aim of the FAO country offices, which are headed by an FAO Representative, is to assist governments to develop policies, programmes and projects to achieve food security and to reduce hunger and malnutrition, to help develop the agricultural, fisheries and forestry sectors and to use their environmental and natural resources in a sustainable manner.</span></p><br><p><br><span><strong>Reporting Lines</strong></span></p><br><p><span>Under the overall guidance of the FAO Representative (FAOR), and the technical guidance and the direct supervision of the Construction Engineer Specialist.</span></p><br><p><br><span><strong>Technical Focus</strong></span></p><br><p><span>The National Project Engineer Analyst will be responsible for the on-site planning, technical supervision, quality control, and daily coordination of all civil, structural, and construction-related activities for FAO projects within the assigned operational areas. The incumbent ensures that all works including building construction, rehabilitation, and site development are executed in full compliance with approved designs, international engineering standards, FAO technical guidelines, and donor requirements. The National Project Engineer Analyst acts as the primary technical support at the project site, ensuring the timely, safe, and cost-effective delivery of infrastructure outputs</span></p><br><p><br><span><strong>Tasks and responsibilities</strong></span></p><br><p><span>The incumbent is expected to perform the below tasks:</span><br><span>• Follow up on-site work activities, review, and endorse workers' attendance sheets</span><br><span>• Process the Inspection Requests and maintain records of their status.</span><br><span>• Check and inspect all activities of work &amp; material, and provide technical support when needed.</span><br><span>• Coordinate with the contractor’s project manager and his staff on a daily basis to advise on the proper execution of the work.</span><br><span>• Ensure that all construction works are performed in accordance with the drawings, specifications and the project deliverable met the plans</span><br><span>• Prepare daily, weekly, and monthly and project closure reports</span><br><span>• Making safety inspections and ensuring construction and site safety</span><br><span>• Review the contractor's payment application, check the quantities, and sign the payment applications.</span><br><span>• Prepare/confirm BoQs outlining the necessary tools and materials as well as preparing each site implementation work plan and construction material delivery plan.</span><br><span>• Assess the standards of delivered materials in terms of quantity and quality as per the specifications.</span><br><span>• Ensure all activities are carried out according to the plans, designs, and drawings and ascertain the accuracy of the qualities, quantities and proportions of the construction materials are precisely maintained.</span><br><span>• Make sure that the works timely progress in order to meet agreed on deadlines.</span><br><span>• Ensure the application of Health, Safety and Environmental standards in the construction site</span><br><span>• Visit the project sites to assess the existing structures and identify the items that are required to be rehabilitated and maintained.</span><br><span>• Prepare a detailed scope of work that describes the current situation of the structure/s and the need for rehabilitation supported with high-quality pictures.</span><br><span>• Develop architectural, structural, electrical, mechanical, and plumping drawings in 2D and 3D as per FAO standards using Engineering software such as AutoCAD and Revit.</span><br><span>• Prepare detailed bill of quantities BOQ to reflect all kinds of activities as per FAO standards.</span><br><span>• All documents are expected to be in editable format.</span><br><span>• Conduct market analysis and provide cost estimates of the construction work.</span><br><span>• Stakeholders and community consultation to ensure that all the land documents are authenticated and legitimate.</span></p><br><p><br><span><strong>CANDIDATES WILL BE ASSESSED AGAINST THE FOLLOWING</strong></span></p><br><p><span><strong>Minimum Requirements </strong></span><br><span>• Bachelor’s degree in civil engineering, Construction Engineering, Architectural Engineering, or related field.</span><br><span>• Minimum of five years of relevant professional experience in construction supervision, site engineering, or field implementation, including building construction, rehabilitation works, or infrastructure projects.</span><br><span>• Working knowledge of English and Arabic.</span><br><span>• National of Yemen.</span></p><br><p><br><span><strong>FAO Core Competencies</strong></span></p><br><p><span>• Results Focus</span><br><span>• Teamwork</span><br><span>• Communication</span><br><span>• Building Effective Relationships</span><br><span>• Knowledge Sharing and Continuous Improvement</span></p><br><p><span><strong>ADDITIONAL INFORMATION</strong></span></p><br><br><ul><li><span>FAO does not charge a fee at any stage of the recruitment process (application, interview meeting, processing)</span></li><li><span>Applications received after the closing date will not be accepted</span></li><li><span>Please note that FAO only considers higher educational qualifications obtained from an institution accredited/recognized in the World Higher Education Database (WHED), a list updated by the International Association of Universities (IAU) / United Nations Educational, Scientific and Cultural Organization (UNESCO). The list can be accessed at </span><span>http://www.whed.net/ </span></li><li><span>For additional employment opportunities visit the FAO employment website: http://www.fao.org/employment/home/en/ </span></li><li><span> Appointment will be subject to certification that the candidate is medically fit for appointment, accreditation, any residency or visa requirements, and security clearances. </span></li></ul> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Established in 1951, IOM is a Related Organization of the United Nations and the leading UN agency in the field of migration. Working closely with governmental, intergovernmental and non-governmental partners, IOM promotes humane and orderly migration for the benefit of all. It saves lives and protects people on the move, drives solutions to displacement, and facilitates pathways for regular migration, while providing services and advice to governments and migrants. IOM is committed to fostering a respectful, inclusive and supportive workplace where all employees can thrive professionally and feel valued. By creating such an environment, IOM aims to better harness the full potential of migration and strengthen its support to people on the move. IOM invites candidates from diverse backgrounds to apply and provides reasonable accommodation throughout the recruitment process when required. Learn more about IOM s workplace culture at IOM workplace culture | International Organization for Migration Internal and external candidates will be considered for this vacancy. For the purposes of this vacancy, internal candidates are defined as staff members holding a regular, fixed-term or short-term graded or ungraded contract, including Junior Professional Officers (JPOs), staff on Special Leave Without Pay (SLWOP), UN Volunteers with at least twelve (12) months of continuous service in IOM, and staff members on secondment/loan released by the Organization, unless otherwise specified in their contract. Staff members holding a regular, fixed-term or short-term graded contract will not retain their contract type if appointed to an ungraded position.</p><p>Working in accordance with the overall directives of the Supply Chain Officer and under the direct supervision of the Supply Chain Assistant, the incumbent will perform the following duties:</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Required Qualifications and Experience</h2><p><strong>Education</strong> Completion of Secondary Education (High School diploma) is required. Technical or vocational certificate in electricity, plumbing, HVAC, or civil engineering is highly desirable. Accredited Universities are those listed in the UNESCO World Higher Education Database.</p><p><strong>Experience</strong> Minimum of 1 to 2 years of progressively responsible experience in building maintenance, facilities support, or mechanical trades.</p><p><strong>Skills</strong> Proficiency in handling power tools and basic electrical measuring instruments safely. Ability to maintain basic logbooks and record keeping.</p><p><strong>Languages</strong> All IOM staff members in all categories are required to be fluent in one of the IOM's official languages (English, French, Spanish). For this position, fluency in English is required (oral and written). Proficiency of language(s) required will be specifically evaluated during the selection process, which may include written and/or oral assessments.</p><h2>Required Competencies</h2><p>IOM s competency framework can be found at this link . Competencies will be assessed during the selection process.</p><h2>Values</h2><p>- all IOM staff members must abide by and demonstrate these five values:</p><ul><li><strong>Inclusion and respect for diversity</strong>: Respects and promotes individual and cultural differences. Encourages diversity and inclusion.</li><li><strong>Integrity and transparency</strong>: Maintains high ethical standards and acts in a manner consistent with organizational principles/rules and standards of conduct.</li><li><strong>Professionalism</strong>: Demonstrates ability to work in a composed, competent and committed manner and exercises careful judgment in meeting day-to-day challenges.</li><li><strong>Courage</strong>: Demonstrates willingness to take a stand on issues of importance.</li><li><strong>Empathy</strong>: Shows compassion for others, makes people feel safe, respected and fairly treated.</li></ul><h2>Core Competencies behavioural indicators</h2><ul><li><strong>Teamwork</strong>: Develops and promotes effective collaboration within and across units to achieve shared goals and optimize results.</li><li><strong>Delivering results</strong>: Produces and delivers quality results in a service-oriented and timely manner. Is action oriented and committed to achieving agreed outcomes.</li><li><strong>Managing and sharing knowledge</strong>: Continuously seeks to learn, share knowledge and innovate.</li><li><strong>Accountability</strong>: Takes ownership for achieving the Organization s priorities and assumes responsibility for own actions and delegated work.</li><li><strong>Communication</strong>: Encourages and contributes to clear and open communication. Explains complex matters in an informative, inspiring and motivational way.</li></ul><h2>Managerial Competencies behavioural indicators (applicable only if with direct reports)</h2><ul><li><strong>Leadership</strong>: Provides a clear sense of direction, leads by example and demonstrates the ability to carry out the Organization s vision. Assists others to realize and develop their leadership and professional potential.</li><li><strong>Empowering others</strong>: Creates an enabling environment where staff can contribute their best and develop their potential.</li><li><strong>Building Trust</strong>: Promotes shared values and creates an atmosphere of trust and honesty.</li><li><strong>Strategic thinking and vision</strong>: Works strategically to realize the Organization s goals and communicates a clear strategic direction.</li><li><strong>Humility</strong>: Leads with humility and shows openness to acknowledging own shortcomings.</li></ul><p></p></section>