وظائف مهندس تفتيش هندسي في اليمن 2026

من ٠ إلى ٠ سنة Naukri Gulf

Architect / Civil Engineer

On-site - اليمن - Yemen ٧ يوليو ٢٠٢٦

الهندسة

<section>Job DescriptionRoles & Responsibilities<div class="paragraph">Our client is undertaking a project that aims to restore access to critical urban service in selected cities within the Republic of Yemen under Yemen Integrated Urban Services Emergency Project Phase two (YIUSEP-II) . One of these services is Energy services. Our client will be responsible for the design and implementation works of PV solar systems and diesel gensets that will increase the targeted facilities reliability and service capacity. All of that to be done ensuring highest standards in design, and respect of state of the art requirements for aesthetics, safety and sustainability. To hire professional Consultant Engineer able to provide a variety of engineering services required by the Our client under instructions and directions of the Project Manager, Renewable Energy Specialist and City Engineer. The engineering services desired include, but are not limited to: Role objectives The scope is to prepare technical designs, Bill of Quantities (BOQ), and tender documents of solar system and/or genset system solutions to target facilities in accordance with Our client guidelines and standards. This will include but not limited to: Carry out field visits to target facilities - which may include traveling to various governates- to: a. Inspect and verify the actual needs; b. Consult with the facility s management and administration about the expected needs. c. Cooperate with electrical engineer to identify the required space for system required components such as Solar PV panels, distribution and control boards, batteries, Diesel generators and fuel tanks. d. Cooperate with the electrical engineer to Identify possible cable routs and any possible obstacles. e. Instruments. The engineer shall be familiar with measurement instruments and apparatus required for such assignment including Surveying Equipment such as TOTAL STATIONS. Prepare appropriate civil and steek structural designs for target facilities based on proposed energy system either solar or gensets - and according to site suitability. This will include the following: a. A full description of the target facility including its location (with GIS coordinates), existing capacity, functionality, provide photograph for the available areas for the required civil and steel structure either rooftop or on ground. b. AutoCAD drawings for the available areas presenting the south direction and azimuth, illustrating the proposed location and details for the panels, steel structure(s), Battey or Generator rooms. c. The design shall consider HSSE and aesthetic concerns. Provide technical and administrative support throughout all stages of designing processes and respond for any inquiries and modification requests from design review team through Our client energy specialist until getting final approval and design certificate. Working in coordination with Our client Renewable Energy Coordinator, City Engineers and Social Safeguard Officer. The consultant will prepare and deliver the required documents in a professional way within specified working period which will include but not limited to: - Technical assessment report. - High quality digital photographs. - AutoCAD detailed design using approved layout templates. - Sizing Calculation sheets. - Bill of Quantities (BOQ), including detailed specifications and cost estimation. All team s members shall working side by side and perform all tasks assigned cooperatively. Protecting the confidentiality of work. Any additional duties required as needed within the scope of the project. Project Supervising: The minimum criteria in regard to the duties responsibilities and expectations of the supervising during the implementation phase of the hybrid solar system project in accordance with Our client guidelines and standards. This will include but not limited to: Responsible for all QC activity on site, performing QC Assessments of work by Technicians. Conduct on- site observations to assure conformance with the contract documents regarding work, materials and equipment. Arrange and attend field observations where issues of conformity with approved design and specifications arise. Make sure that the contractor is adhering the minimum safety and quality policies and procedures. Review shop drawings and advise of any significant changes required. Issue field instructions for correction of any work that does not conform to the approved contract documents, and if needed, Request change orders when required for review, discussion and approval. Review the project file maintained on the site by the Supplier/contractor to ensure that the necessary tests have been performed and the results were satisfactory, issue remedial instructions if the test results were found unsatisfactory. Review the project file maintained at the site by the Supplier/contractor to ensure that all the necessary documents, such as, but not limited to, warranties, guarantees, test results, shop drawings, field instructions, reports and change orders, etc. Are filed and kept at a place. Review the implementation progress against the most current implementation progress schedule with the Supplier/contractor, evaluate its suggestions and submit recommendations. Review the payment requisitions presented by the Supplier/contractor and certify consistency with the implementation progress. Conduct an inspection of the development, or a portion of it, on request from the Supplier/contractor for issuance of a substantial completion certificate and develop a punch-list of incomplete items. Conduct an inspection of the development for the completion of the punch-list items. Inspect the material storage for their conformance with the contract requirements and general suitability, issue written recommendations, if necessary. All team s members shall working side by side and perform all tasks assigned cooperatively. Protecting the confidentiality of work. Any additional duties required as needed within the scope of the project. Project reporting To Project Manager</div></section><section>Desired Candidate Profilea. Education University degree in Civil engineering.b. Work Experience More than 6 years working experience in project assessment, design supervising and management experience in civil and steel structural design and implementation is essential. Experience in the usage of computers and software packages (Structural design software, Autodesk AutoCAD, Microsoft office). Very Good Knowledge in written and oral of English and Arabic languages is required.c. Key Competencies Excellent oral and written communication skills. Strong interpersonal skills and ability to work as part of a team Team management This role has no team management responsibility.</section>

من ٠ إلى ٠ سنة Naukri Gulf

Architect / Civil Engineer

On-site - اليمن - Yemen ٢ يوليو ٢٠٢٦

الهندسة

<section>Job DescriptionRoles & Responsibilities<div class="paragraph">Overview of position Our client is undertaking a project that aims to restore access to critical urban service in selected cities within the Republic of Yemen under Yemen Integrated Urban Services Emergency Project Phase two (YIUSEP-II) . One of these services is Energy services. Our client will be responsible for the design and implementation works of PV solar systems and diesel gensets that will increase the targeted facilities reliability and service capacity. All of that to be done ensuring highest standards in design, and respect of state of the art requirements for aesthetics, safety and sustainability. To hire professional Consultant Engineer able to provide a variety of engineering services required by the Our client under instructions and directions of the Project Manager, Renewable Energy Specialist and City Engineer. The engineering services desired include, but are not limited to:Role objectives The scope is to prepare technical designs, Bill of Quantities (BOQ), and tender documents of solar system and/or genset system solutions to target facilities in accordance with UNOPS guidelines and standards. This will include but not limited to:<ul><li>Carry out field visits to target facilities - which may include traveling to various governates- to:</li><ul><li>a. Inspect and verify the actual needs;</li><li>b. Consult with the facility s management and administration about the expected needs.</li><li>c. Cooperate with electrical engineer to identify the required space for system required components such as Solar PV panels, distribution and control boards, batteries, Diesel generators and fuel tanks.</li><li>d. Cooperate with the electrical engineer to Identify possible cable routs and any possible obstacles.</li><li>e. Instruments. The engineer shall be familiar with measurement instruments and apparatus required for such assignment including Surveying Equipment such as TOTAL STATIONS.</li></ul><li>Prepare appropriate civil and steek structural designs for target facilities based on proposed energy system either solar or gensets - and according to site suitability. This will include the following:</li><ul><li>a. A full description of the target facility including its location (with GIS coordinates), existing capacity, functionality, provide photograph for the available areas for the required civil and steel structure either rooftop or on ground.</li><li>b. AutoCAD drawings for the available areas presenting the south direction and azimuth, illustrating the proposed location and details for the panels, steel structure(s), Battey or Generator rooms.</li><li>c. The design shall consider HSSE and aesthetic concerns.</li></ul><li>Provide technical and administrative support throughout all stages of designing processes and respond for any inquiries and modification requests from design review team through UNOPS energy specialist until getting final approval and design certificate.</li><li>Working in coordination with UNOPS Renewable Energy Coordinator, City Engineers and Social Safeguard Officer.</li><li>The consultant will prepare and deliver the required documents in a professional way within specified working period which will include but not limited to:</li><ul><li>- Technical assessment report.</li><li>- High quality digital photographs.</li><li>- AutoCAD detailed design using approved layout templates.</li><li>- Sizing Calculation sheets.</li><li>- Bill of Quantities (BOQ), including detailed specifications and cost estimation.</li></ul></ul>All team s members shall working side by side and perform all tasks assigned cooperatively. Protecting the confidentiality of work. Any additional duties required as needed within the scope of the project.Project Supervising: The minimum criteria in regard to the duties responsibilities and expectations of the supervising during the implementation phase of the hybrid solar system project in accordance with UNOPS guidelines and standards. This will include but not limited to:<ul><li>Responsible for all QC activity on site, performing QC Assessments of work by Technicians.</li><li>Conduct on- site observations to assure conformance with the contract documents regarding work, materials and equipment.</li><li>Arrange and attend field observations where issues of conformity with approved design and specifications arise.</li><li>Make sure that the contractor is adhering the minimum safety and quality policies and procedures.</li><li>Review shop drawings and advise of any significant changes required.</li><li>Issue field instructions for correction of any work that does not conform to the approved contract documents, and if needed, Request change orders when required for review, discussion and approval.</li><li>Review the project file maintained on the site by the Supplier/contractor to ensure that the necessary tests have been performed and the results were satisfactory, issue remedial instructions if the test results were found unsatisfactory.</li><li>Review the project file maintained at the site by the Supplier/contractor to ensure that all the necessary documents, such as, but not limited to, warranties, guarantees, test results, shop drawings, field instructions, reports and change orders, etc. Are filed and kept at a place.</li><li>Review the implementation progress against the most current implementation progress schedule with the Supplier/contractor, evaluate its suggestions and submit recommendations.</li><li>Review the payment requisitions presented by the Supplier/contractor and certify consistency with the implementation progress.</li><li>Conduct an inspection of the development, or a portion of it, on request from the Supplier/contractor for issuance of a substantial completion certificate and develop a punch-list of incomplete items.</li><li>Conduct an inspection of the development for the completion of the punch-list items.</li><li>Inspect the material storage for their conformance with the contract requirements and general suitability, issue written recommendations, if necessary.</li></ul>All team s members shall working side by side and perform all tasks assigned cooperatively. Protecting the confidentiality of work. Any additional duties required as needed within the scope of the project.Project reporting To Project ManagerKey competencies4. Qualifications and Experience<ul><li>a. Education University degree in Civil engineering.</li><li>b. Work Experience More than 6 years working experience in project assessment, design supervising and management experience in civil and steel structural design and implementation is essential. Experience in the usage of computers and software packages (Structural design software, Autodesk AutoCAD, Microsoft office). .</li></ul></div></section><section>Desired Candidate Profile<ul><li>a. Education University degree in Civil engineering.</li><li>b. Work Experience More than 6 years working experience in project assessment, design supervising and management experience in civil and steel structural design and implementation is essential. Experience in the usage of computers and software packages (Structural design software, Autodesk AutoCAD, Microsoft office). Very Good Knowledge in written and oral of English and Arabic languages is required.</li><li>c. Key Competencies Excellent oral and written communication skills. Strong interpersonal skills and ability to work as part of a team</li></ul></section>

من ٠ إلى ٠ سنة Naukri Gulf

Senior Irrigation Engineer

On-site - اليمن - Yemen ٨ يوليو ٢٠٢٦

الهندسة

<section>Job DescriptionRoles & Responsibilities<div class="paragraph">This European Consultancy continues to grow in the urban development, transport, renewable energy and sustainable development sectors. With over half of their international business now coming from central and eastern Europe they are currently recruiting for experts in the above fields.</div></section><section>Desired Candidate ProfileThey currently seek a Senior Irrigation Engineer for a 12 month assignment in Yemen. To be successful you must have the following:<ul><li>Relevant advanced degree in agricultural or social sciences, or a combination of undergraduate degree in a relevant civil engineering degree</li><li>In-depth knowledge of agricultural development issues.</li><li>Strong demonstrated leadership, team building, coaching and facilitation skills.</li><li>Excellent command of English, both oral and written. Arabic would be an advantage.</li></ul>Professional experience required:<ul><li>A minimum of 10 years progressively in development assistance of which at least 5 years should be of practical field experience in agricultural development projects.</li><li>Involved as Team Leader of two long term development assistance projects (>12 months).</li><li>Experience in European Commission project management.</li></ul></section>

من ٠ إلى ٠ سنة Naukri Gulf

Architect / Civil Engineer

On-site - اليمن - Yemen ٣٠ يونيو ٢٠٢٦

الهندسة

<section>Job DescriptionRoles & Responsibilities<div class="paragraph">Overview of position Our client is undertaking a project that aims to restore access to critical urban service in selected cities within the Republic of Yemen under Yemen Integrated Urban Services Emergency Project Phase two (YIUSEP-II) . One of these services is Energy services. Our client will be responsible for the design and implementation works of PV solar systems and diesel gensets that will increase the targeted facilities reliability and service capacity. All of that to be done ensuring highest standards in design, and respect of state of the art requirements for aesthetics, safety and sustainability. To hire professional Consultant Engineer able to provide a variety of engineering services required by the Our client under instructions and directions of the Project Manager, Renewable Energy Specialist and City Engineer. The engineering services desired include, but are not limited to:Role objectives The scope is to prepare technical designs, Bill of Quantities (BOQ), and tender documents of solar system and/or genset system solutions to target facilities in accordance with UNOPS guidelines and standards. This will include but not limited to:<ul><li>Carry out field visits to target facilities - which may include traveling to various governates- to:</li><ul><li>a. Inspect and verify the actual needs;</li><li>b. Consult with the facility s management and administration about the expected needs.</li><li>c. Cooperate with electrical engineer to identify the required space for system required components such as Solar PV panels, distribution and control boards, batteries, Diesel generators and fuel tanks.</li><li>d. Cooperate with the electrical engineer to Identify possible cable routs and any possible obstacles.</li><li>e. Instruments. The engineer shall be familiar with measurement instruments and apparatus required for such assignment including Surveying Equipment such as TOTAL STATIONS.</li></ul><li>Prepare appropriate civil and steek structural designs for target facilities based on proposed energy system either solar or gensets - and according to site suitability. This will include the following:</li><ul><li>a. A full description of the target facility including its location (with GIS coordinates), existing capacity, functionality, provide photograph for the available areas for the required civil and steel structure either rooftop or on ground.</li><li>b. AutoCAD drawings for the available areas presenting the south direction and azimuth, illustrating the proposed location and details for the panels, steel structure(s), Battey or Generator rooms.</li><li>c. The design shall consider HSSE and aesthetic concerns.</li></ul><li>Provide technical and administrative support throughout all stages of designing processes and respond for any inquiries and modification requests from design review team through UNOPS energy specialist until getting final approval and design certificate.</li><li>Working in coordination with UNOPS Renewable Energy Coordinator, City Engineers and Social Safeguard Officer.</li><li>The consultant will prepare and deliver the required documents in a professional way within specified working period which will include but not limited to:</li><ul><li>- Technical assessment report.</li><li>- High quality digital photographs.</li><li>- AutoCAD detailed design using approved layout templates.</li><li>- Sizing Calculation sheets.</li><li>- Bill of Quantities (BOQ), including detailed specifications and cost estimation.</li></ul><li>All team s members shall working side by side and perform all tasks assigned cooperatively.</li><li>Protecting the confidentiality of work.</li><li>Any additional duties required as needed within the scope of the project.</li></ul>Project Supervising: The minimum criteria in regard to the duties responsibilities and expectations of the supervising during the implementation phase of the hybrid solar system project in accordance with UNOPS guidelines and standards. This will include but not limited to:<ul><li>Responsible for all QC activity on site, performing QC Assessments of work by Technicians.</li><li>Conduct on- site observations to assure conformance with the contract documents regarding work, materials and equipment.</li><li>Arrange and attend field observations where issues of conformity with approved design and specifications arise.</li><li>Make sure that the contractor is adhering the minimum safety and quality policies and procedures.</li><li>Review shop drawings and advise of any significant changes required.</li><li>Issue field instructions for correction of any work that does not conform to the approved contract documents, and if needed, Request change orders when required for review, discussion and approval.</li><li>Review the project file maintained on the site by the Supplier/contractor to ensure that the necessary tests have been performed and the results were satisfactory, issue remedial instructions if the test results were found unsatisfactory.</li></ul></div></section><section>Desired Candidate ProfileKey competencies 4. Qualifications and Experience a. Education University degree in Civil engineering. b. Work Experience More than 6 years working experience in project assessment, design supervising and management experience in civil and steel structural design and implementation is essential. Experience in the usage of computers and software packages (Structural design software, Autodesk AutoCAD, Microsoft office). Very Good Knowledge in written and oral of English and Arabic languages is required. c. Key Competencies Excellent oral and written communication skills. Strong interpersonal skills and ability to work as part of a team Team management This role has no team management responsibility. Further information Qualified female candidates are encouraged to apply for this role.</section>

5 - 8 Years Naukri Gulf

National Engineer Analyst Electricity FAO

On-site - اليمن - Yemen ٩ يونيو ٢٠٢٦

الهندسة

<section>Job DescriptionRoles & Responsibilities<div class="paragraph">*<div> Organizational Setting FAO's office for Yemen is responsible for developing, promoting, overseeing and implementing agreed strategies for addressing countrywide food, agriculture and rural development priorities under Yemen. It develops and maintains relations with the relevant Ministries at country level. This position is based in FAO Representation in Aden, Yemen. The main aim of the FAO country offices, which are headed by an FAO Representative, is to assist governments to develop policies, programmes and projects to achieve food security and to reduce hunger and malnutrition, to help develop the agricultural, fisheries and forestry sectors and to use their environmental and natural resources in a sustainable manner. Reporting Lines Under the overall guidance of the FAO Representative (FAOR), and the technical guidance and the direct supervision of the Construction Engineer Specialist. Technical Focus The National Engineer Analyst Electricity will be responsible for the planning, design, technical review of all electrical, solar power, HVAC, low-current, mechanical, and safety systems for FAO projects across various programmes, as well as FAO offices and guesthouses. The incumbent ensures that all systems are designed and implemented in accordance with international standards, FAO technical guidelines, and safety requirements, Tasks and responsibilities Support the analysis and review of electrical, solar power, HVAC, and electromechanical systems, including load calculations, wiring layouts, and emergency/backup power configurations, under the guidance of the Construction Engineer Specialist. Assist in preparation and validation of low-current system designs, such as CCTV, fire alarm/suppression, public address, and access-control systems. Support in preparation of BoQs, cost estimates, and technical specifications for all electrical, HVAC, solar, and low-current components of FAO projects. Support site inspections and monitor the implementation to ensure compliance with approved drawings, specifications, and safety standards. Assist in reviewing the delivered materials for quality and conformity with technical specifications. Support in review contractors payment certificates, verify executed quantities, and provide technical certification. Contribute to technical assessments of electrical, solar, HVAC, and low-current systems in FAO offices and guesthouses and recommend upgrades or corrective actions, under the guidance of the Construction Engineer Specialist. Work closely with Construction Engineer Specialist to provide technical support to construction engineers, procurement teams, and contractors. CANDIDATES WILL BE ASSESSED AGAINST THE FOLLOWING Minimum Requirements Bachelor s degree in electrical engineering, Electromechanical Engineering, Mechanical Engineering, or related field. Minimum of five years of relevant professional experience in electrical and electromechanical engineering. Working knowledge of English and Arabic. National of Yemen. FAO Core Competencies Results Focus Teamwork Communication Building Effective Relationships Knowledge Sharing and Continuous Improvement ADDITIONAL INFORMATION </div> <ul> <li>FAO does not charge a fee at any stage of the recruitment process (application, interview meeting, processing)</li> <li>Applications received after the closing date will not be accepted</li> <li>Please note that FAO only considers higher educational qualifications obtained from an institution accredited/recognized in the World Higher Education Database (WHED), a list updated by the International Association of Universities (IAU) / United Nations Educational, Scientific and Cultural Organization (UNESCO). The list can be accessed at http://www.whed.net/ </li> <li>For additional employment opportunities visit the FAO employment website: http://www.fao.org/employment/home/en/ </li> <li> Appointment will be subject to certification that the candidate is medically fit for appointment, accreditation, any residency or visa requirements, and security clearances. </li> </ul></div></section>

من ٠ إلى ٠ سنة بيت.كوم

Enumerators (Volunteer) Aden - National Only

On-site - اليمن ٢٨ يوليو ٢٠٢٦

On-site - اليمن - صنعاء ٧ يوليو ٢٠٢٦

Job OverviewWe are seeking a motivated Full Stack Developer to join our dynamic team in Sana'a, Yemen. This full-time role is ideal for a 1–2-year experienced developer who is passionate about building scalable web applications and delivering high-quality software solutions. You will work closely with product managers, designers, and other engineers to develop, test, and deploy features that meet business needs and delight users. About the CompanyOur company specializes in delivering innovative digital solutions across multiple industries. We value collaboration, continuous learning, and delivering reliable software that drives real-world impact. We are committed to fostering a supportive and inclusive work environment where every team member can grow and contribute.Key Responsibilities and Duties<ul><li>Design, develop, test, and maintain front-end and back-end components of web applications using modern frameworks and technologies.</li><li>Collaborate with cross-functional teams to gather requirements, propose technical solutions, and implement features end-to-end.</li><li>Develop RESTful and/or GraphQL APIs, integrate third-party services, and ensure robust data handling and security practices.</li><li>Contribute to architecture decisions, code reviews, and writing clean, maintainable code with appropriate test coverage.</li><li>Participate in agile ceremonies, estimate tasks, and manage workload to meet sprint goals and deadlines.</li><li>Identify performance bottlenecks and implement optimizations for both client- and server-side performance.</li><li>Maintain documentation for code, APIs, and deployment processes; assist in user support and troubleshooting as needed.</li></ul> Qualifications and Requirements<ul><li>Bachelor’s degree in Computer Science, Software Engineering, or a related field.</li><li>1–2 years of hands-on development experience across full-stack technologies.</li><li>Solid foundation in JavaScript/TypeScript, HTML5, and CSS3; experience with modern frameworks (e.g., React, Vue, Angular) and server-side technologies (e.g., Node.js, Express, Python, or Java).</li><li>Experience building and consuming RESTful APIs and/or GraphQL APIs.</li><li>Familiarity with relational and/or NoSQL databases (e.g., MySQL, PostgreSQL, MongoDB).</li><li>Understanding of version control (Git) and collaborative development workflows.</li><li>Ability to work independently and as part of a team; strong problem-solving and communication skills.</li><li>Willingness to learn and adapt in a fast-paced environment; proficiency with English for technical communication is a plus.</li></ul> Required Skills<ul><li>Full stack development</li><li>Front-end frameworks and responsive design</li><li>API design and integration</li><li>Database design and query optimization</li><li>Version control and CI/CD basics</li><li>Problem-solving and debugging</li></ul> Benefits and Perks<ul><li>Competitive salary and performance-based bonuses</li><li>Health insurance coverage</li><li>Paid annual leave and holidays</li><li>Opportunities for professional development and training</li><li>Collaborative and flexible work environment</li></ul>

من ٠ إلى ٠ سنة بيت.كوم

R&D Research Scientist

On-site - اليمن ١٨ يونيو ٢٠٢٦

البحث والتطوير

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> We are Reckitt Home to the world's best loved and trusted hygiene, health, and nutrition brands. Our purpose defines why we exist: to protect, heal and nurture in the relentless pursuit of a cleaner, healthier world. We are a global team united by this purpose. Join us in our fight to make access to the highest quality hygiene, wellness, and nourishment a right and not a privilege. Research & Development In Research and Development, we're full of highly skilled talents that include Scientists, Engineers, Medical, Clinical and Regulatory professionals - all working to create a cleaner, healthier world. With nine Centres of Excellence, we continually seek out new opportunities by using science, our entrepreneurial flare and our fearless innovation to develop and enhance our existing portfolio, never compromising on quality or performance. We do the right thing, always, by ensuring we act with responsibility and integrity, by complying with regulatory legislation across the globe, whilst ensuring our products are safe for our consumers and are to the highest quality. The size of our organisation means you'll have the opportunity to learn and work in different functions within R&D, giving you exposure to different disciplines, teams and environments. You will also have access to our Research and Development Academy, designed to develop our team and allow you to grow in our great organisation. About the role As a R&D Research Scientist within Reckitt’s Global Development Team, you will play a key role in managing and delivering projects with a high degree of technical complexity, collaborating closely with both technical and business stakeholders in a fast-paced, dynamic environment. You will lead and execute development activities for both new products and improvements to existing formulations, ensuring alignment with consumer needs, business objectives, and the highest standards of quality and safety. Success in this role requires strong leadership capabilities, the ability to develop others, and a solid foundation of technical expertise. Your responsibilities <ul> <li>Translate consumer insights and business needs into technical solutions, applying a strong understanding of product strategy, operating models, and cost structures</li> <li>Deliver assigned projects and activities for new product development and enhancement of existing formulations in line with Innovation Development Briefs, managing end-to-end execution</li> <li>Design and drive formulation development, managing laboratory work plans and contributing to next-generation innovation while solving complex technical challenges</li> <li>Ensure all development activities comply with regulatory, HSE, and global/local quality standards, adhering to laboratory best practices</li> <li>Collaborate cross-functionally with Marketing, Supply, and regional R&D teams to ensure alignment, smooth scale-up, and successful market launches</li> <li>Act as a technical leader, supervising laboratory activities while coaching and developing team members to build a high-performance culture</li> </ul> The experience we're looking for <ul> <li>Master’s degree in chemistry</li> <li>At least 3 years of professional experience in the research & development of an FMCG company</li> <li>Good project management skills that can be applied in a technology delivery environment and a proven track record of results</li> <li>Technical expertise and curiosity with the ability to devolp (turning functioning prototypes into finished products/systems/methods) </li> <li>Ability to consider technology requirements of production during product development</li> <li>Experience of working with factories (up-scaling) and external partner</li> <li>Experience with Quality Management System related to product development</li> <li>Fluent in English is a must; Basic German desired, willingness to learn German</li> <li>Flexible to travel internationally and for extended periods of time to oversee and support project delivery on site</li> </ul> The skills for success Product Development, R&D, Project Management, Problem Solving, Analytical Thinking, Functional Collaboration. What we offer With inclusion at the heart of everything we do, working alongside our four global Employee Resource Groups, we support our people at every step of their career journey, helping them to succeed in their own individual way. We invest in the wellbeing of our people through parental benefits, an Employee Assistance Program to promote mental health, and life insurance for all employees globally. We have a range of other benefits in line with the local market. Through our global share plans we offer the opportunity to save and share in Reckitt's potential future successes. For eligible roles, we also offer short-term incentives to recognise, appreciate and reward your work for delivering outstanding results. You will be rewarded in line with Reckitt's pay for performance philosophy. Equality We recognise that in real life, great people don't always 'tick all the boxes'. That's why we hire for potential as well as experience. Even if you don't meet every point on the job description, if this role and our company feels like a good fit for you, we still want to hear from you. All qualified applicants will receive consideration for employment without regard to age, disability or medical condition; colour, ethnicity, race, citizenship, and national origin; religion, faith; pregnancy, family status and caring responsibilities; sexual orientation; sex, gender identity, gender expression, and transgender identity; protected veteran status; size or any other basis protected by appropriate law. </div>

من ٠ إلى ٠ سنة Naukri Gulf

Water Sanitation Monitoring Associate

On-site - اليمن - Yemen ٧ يوليو ٢٠٢٦

اللوجستيات وسلاسل الإمداد والمشتريات

<section>Job DescriptionRoles & Responsibilities<div class="paragraph">The Logistics Officer will perform the following duties with full effectiveness, transparency, and integrity:Ensure that all inbound supplies are as per the contract specifications in terms of quantity, quality, INCOTERMS and Distributed as per the approved distribution plans.Provide technical support on specifications, cost implications and logistics arrangements for safe delivery of suppliesProvide advice and technical support to suppliers, customs clearance agents and office team on required logistics arrangements to facilitate projects implementation and the flow of supplies.Ensure that goods and services are provided according to client needs with lead times that meet contracts deadlinesEnsure that all logistics actions are conducted as required by Our client according to Our client Financial Rules and Regulations and the applicable policies and procedures as well as the highest degree of personal and professional ethics;Update Logistics standard operating procedures to ensure best practices that meets operational needsReview shipping documents and shipments exemption requests for information consistency prior to communicating with official authoritiesMonitor the progress of shipments for our client and its clients and coordinate the delivery of the same at the client s delivery placesAssists in planning, designing and implementation of appropriate logistics systems including warehousing and in-country transport capacity, including establishment of Long Term Arrangements and frame agreements for e.g. customs clearance, storage, transport and distribution as might be required.Monitor and follow-up timely clearance, delivery and handover of goods and consignments to partnersTrack and monitor the water supply through trucking in response to daily complaints from the community.Work closely with the operation engineers and hotline team to address all water trucking needs in response to any complaints or supply issues in the network.Prepare daily and weekly reports on water tracking and quality sampling and testing.Attend all operational and WASH meetings and contribute to the monitoring of water supply through trucking to NGOs and institutions .Liaise with the contractor on the water trucking to all institutions if they are not getting private water supply.Coordinate with the contractor on water quality testingEnsure that all water suppliers are delivering water from approved wells and according to national standards.Update and manage the master list of truck drivers and report any misbehaviors or illegal driving actions to UNICEF and SRAD if needed.Support the Project Team in Project planning, implementation and day-to-day activities.Support project management activities and monitor project implementation, in line with Our client Project Management Manual and Project Management ERP.Support administrative, procurement and financial processes, such as Requests for Proposals announcements/ RFQs, and evaluation processes, communicating different administrative information to Project team, beneficiaries, and administrative monitoring of the grant contracts.Manage the duty exemption process at all stages, including import clearancesLiaise with government authorities regarding the distribution planLiaise with other UN agencies and humanitarian partners on common logistics and supply chain issuesDevelop delivery schedules in collaboration with team member Sub-recipients.Develop Standard operating procedures to ensure Good Storage and Distribution practices.Develop plan for monitoring of storage and distribution of pharmaceuticals and healthTo Project ManagerTreats all individuals with respect; responds sensitively to diff erences and encourages others to do the same.Upholds organizational and ethical norms.Maintains high standards of trustworthiness.Role model for diversity and inclusion.Acts as a positive role model contributing to the team spirit.Collaborates and supports the development of others.Demonstrates understanding of the impact of own role on all partners and always puts the end benefi ciary fi rst.Builds and maintains strong external relationships and is a competent partner for others (if relevant to the role).Effi ciently establishes an appropriate course of action for self and/or others to accomplish a goal.Actions lead to total task accomplishment through concern for quality in all areas.Sees opportunities and takes the initiative to act on them.Understands that responsible use of resources maximizes our impact on our benefi ciaries.Open to change and fl exible in a fast paced environment.Eff ectively adapts own approach to suit changing circumstances or requirements.Refl ects on experiences and modifi es own behavior.Performance is consistent, even under pressure.Always pursues continuous improvements.Evaluates data and courses of action to reach logical, pragmatic decisions.Takes an unbiased, rational approach with calculated risks.Applies innovation and creativity to problem-solving.Expresses ideas or facts in a clear, concise and open manner.Communication indicates a consideration for the feelings and needs of others.Actively listens and proactively shares knowledge.Handles confl ict eff ectively, by overcoming diff erences of opinion and fi nding common ground.</div></section><section>Desired Candidate Profile<ul><li>Bachelor Degree in Public Relation, business Administration, Supply chain, logistics, Management or a related field is an asset</li><li>6 years of progressive responsible experience in supervision, engineering and include minimum two years in logistics, procurement or related field is required</li><li>Previous experience working in international organizations is an asset</li><li>Experience in usage of computers and office software packages (MS Word, Excel, etc.), advanced knowledge of automated procurement systems, experience in handling web based management systems is highly desirable.</li><li>Fluency in both English and Arabic (written and verbal).</li></ul></section>

وظائف مهندس تفتيش هندسي في اليمن

Architect / Civil Engineer

Architect / Civil Engineer

Senior Irrigation Engineer

Architect / Civil Engineer

National Engineer Analyst Electricity FAO

Enumerators (Volunteer) Aden - National Only

Enumerator

Enumerator

Supply Officer

Data Entry Supervisor

Vaccine and Cold Chain Management Trainer

Enumerator

Enumerators

Water Sanitation Monitoring Associate

Associate

Full Stack Developer

R&D Research Scientist

Water Sanitation Monitoring Associate

أصحاب المواقع

أصحاب العمل

الباحثين عن عمل

وظائف مهندس تفتيش هندسي في اليمن

اشترك لتصلك وظائف وظائف مهندس تفتيش هندسي في اليمن الجديدة دوريا علي بريدك